Anti Slip Tapes / Non Slip Tapes
Table for easy reference during Your Order:
| PICTURE | Product Code | Size | Colour | Surface type |
 |
HS-P |
50 mm x 18 m; 100 mm x 18 m |
Yellow-green (photoluminescent) |
Hard |
 |
HS-B |
50 mm x 18 m; 100 mm x 18 m |
Black | Hard |
 |
HS-T |
50 mm x 18 m; 100 mm x 18 m |
Transparent | Hard |
 |
HS-YB |
50 mm x 18 m; 100 mm x 18 m |
Yellow / Black (diagonal stripes) |
Hard |
 |
SS-W |
50 mm x 18 m; 100 mm x 18 m |
White | Soft |
 |
SS-B |
50 mm x 18 m; 100 mm x 18 m |
Black | Soft |
 |
SS-T |
50 mm x 18 m; 100 mm x 18 m |
Transparent | Soft |
GENERAL DESCRIPTION
HS (Hard) & SS (Soft) series Anti Slip Tapes is an exelent & economical solution of improving the Safety Standards in the SLIP DANGER AREAS. They are available in 2 basic dimentions (50 mm & 100 mm wide). Installation is very simple according to below Instruction.
INSTALLATION
- Make sure that the surface is clean & dry, free of oils, sand or dust;
- Release small piece of the release foil/paper;
- Apply the first part of the Tape to the surface & continue removing the release foil gradually;
- The full adhesive strength is achieved after 48 hours after installation. Be carefully to avoid any HEAVY USE of the new installed Tape during this time;
- Considering many types of the surfaces where the Anti Slip Tapes can be applied - the final user shall perform his own tests to ensure that the product is suitable for his application and that it meets his demands.
AVAILABILITY
HARD SURFACE Tapes (HS) - posses excellent ANTI-SLIP PROPERTIES however because of the rough surface they are difficult in cleaning and cannot be washed with mops.
SOFT SURFACE Tapes (SS) - are mop-friendly solution, they offer much lower ANTI-SLIPPERY PROPERTIES, however they are much easier in maintenance & cleaning.
